Language
Why the CNC wire butt welding machine transformer is 30% better than the ordinary welding machine
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
Why the CNC wire butt welding machine transformer is 30% better than the ordinary welding machine
Release time:2022.03.04
Summary of information:
As we all know, if you want the welding machine to last a long time, you must ensure that the performance of the transformer at the heart of the welding machine is not bad. It is called a transformer, but it is actually also called a butt welding machine power supply. It is as important as the engine to a car. In order to obtain a clear cost-effective effect in the resistance welding machine market, let the brand stand out
As we all know, if you want the welding machine to last a long time, you must ensure that the performance of the transformer at the heart of the welding machine is not bad. It is called a transformer, but it is actually also called a butt welding machine power supply. It is as important as the engine to a car.
In order to be inResistance welding machineThe market has achieved a clear cost-effective effect, making the brand invincible. Xinxing Welding has worked hard on R&D, design and manufacturing quality, so that the performance of butt welding machine and spot welding machine transformers is 30-50% higher than that of ordinary welding machines. Greatly extend the product life of all resistance welding machines to more than 20 years.
1. Using high-quality high-permeability silicon steel sheets, the silicon steel sheets are sheared and cross-stacked to form a shell, so that most of the magnetic flux is confined to the core. The coil can thereby achieve a high degree of magnetic coupling without energy loss.
2. Use two sets of all-copper covered wires with different numbers of turns to make the coils. Their inductances are combined together. When an AC current flows through one set of coils, an AC voltage with the same frequency will be induced in the other set of coils, thus reducing the voltage better.
3. Use angle iron brackets to fix it, which is stable and corrosion-resistant.
4. The insulation grade reaches Class B and Class F, and the insulation temperature resistance is 130℃ and 150℃. The surface is also painted with insulating paint and baked solid, and its service life is guaranteed.
5. The current is large and the voltage is small. The maximum no-load voltage of the 10KW butt welding machine is only 3.27V, which is smaller than that of a mobile phone. It is safe and guaranteed.
6. With temperature switch and over-temperature alarm.
7. The job number, date number and nameplate information are complete and the quality is traceable.
Xinxing Welding Equipment Factory is a 29-year resistance welding machine manufacturer integrating R&D, production and sales. Its products include:
1. Butt welding machine, micro butt welding machine, medium power butt welding machine,High power butt welding machine, everything from manual to automatic.
2. There is a spot welding machine, semi-automatic foot-operated spot welding machine, pneumatic spot welding machine, capacitor energy storage spot welding machine, medium frequency inverter spot welding machine, row welding machine, fully automatic welding production line, etc. that is suitable for you.
3. The projection welding machine can be quickly modified from the spot welding machine according to the workpiece material style.
4. Seam welding machine, power frequency AC seam welding machine, medium frequency DC seam welding machine, customized for you according to the workpiece.
5. Resistance brazing machine, customized according to the size of copper plate and copper bar.
If you are also interested in our welding equipment, please contact us: 400-001-0502.
In order to be inResistance welding machineThe market has achieved a clear cost-effective effect, making the brand invincible. Xinxing Welding has worked hard on R&D, design and manufacturing quality, so that the performance of butt welding machine and spot welding machine transformers is 30-50% higher than that of ordinary welding machines. Greatly extend the product life of all resistance welding machines to more than 20 years.
What are the characteristics and advantages of CNC metal wire butt welding machine transformer:
Its power is small, only 3kw, 5kw, 10kw1. Using high-quality high-permeability silicon steel sheets, the silicon steel sheets are sheared and cross-stacked to form a shell, so that most of the magnetic flux is confined to the core. The coil can thereby achieve a high degree of magnetic coupling without energy loss.
2. Use two sets of all-copper covered wires with different numbers of turns to make the coils. Their inductances are combined together. When an AC current flows through one set of coils, an AC voltage with the same frequency will be induced in the other set of coils, thus reducing the voltage better.
3. Use angle iron brackets to fix it, which is stable and corrosion-resistant.
4. The insulation grade reaches Class B and Class F, and the insulation temperature resistance is 130℃ and 150℃. The surface is also painted with insulating paint and baked solid, and its service life is guaranteed.
5. The current is large and the voltage is small. The maximum no-load voltage of the 10KW butt welding machine is only 3.27V, which is smaller than that of a mobile phone. It is safe and guaranteed.
6. With temperature switch and over-temperature alarm.
7. The job number, date number and nameplate information are complete and the quality is traceable.
Xinxing Welding Equipment Factory is a 29-year resistance welding machine manufacturer integrating R&D, production and sales. Its products include:
1. Butt welding machine, micro butt welding machine, medium power butt welding machine,High power butt welding machine, everything from manual to automatic.
2. There is a spot welding machine, semi-automatic foot-operated spot welding machine, pneumatic spot welding machine, capacitor energy storage spot welding machine, medium frequency inverter spot welding machine, row welding machine, fully automatic welding production line, etc. that is suitable for you.
3. The projection welding machine can be quickly modified from the spot welding machine according to the workpiece material style.
4. Seam welding machine, power frequency AC seam welding machine, medium frequency DC seam welding machine, customized for you according to the workpiece.
5. Resistance brazing machine, customized according to the size of copper plate and copper bar.
If you are also interested in our welding equipment, please contact us: 400-001-0502.
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
What is the difference between CNC stainless steel spot welding machine and 8-speed spot welding machine?
Summary of information:
The CNC stainless steel spot welding machine and the 8-speed spot welding machine are both foot-operated spot welding machines, which are resistance welding machines. The Xinxing models are DN1S and DN1. They can be used to spot weld mild steel, stainless steel, galvanized, and other plate materials and wires, stamping parts, and metal mesh. They have strong welding, fast speed, easy operation, and simple maintenance.
CNC stainless steel spot welding machine with8The stall spot welding machines are all foot-operated spot welding machines, which are resistance welding machines. The models in Xinxing areDN1SandDN1, can overlap the spot welding of mild steel, stainless steel, galvanized, and other plates and wires, stamping parts, and metal mesh. It has the advantages of firm welding, fast speed, easy operation, simple maintenance, and safe work. The principle of mechanical lever is used to weld various workpieces effortlessly. Widely used in sheet metal, lamps, wires and cables, hardware and electrical appliances, machinery manufacturing, environmental protection and other industries.
They are mechanically identical, the main difference is in the electrical part:
1) CNC stainless steel spot welding machine can control the speed of current and suppress90%of sparks flying, and8The gear spot welder reaches the maximum current when welding, so sparks are often seen flying, which frightens the workers.
2) The electrical life of the CNC stainless steel spot welding machine is8Adjustable gear spot welding machine5More than times, it uses semiconductor thyristor modules to switch current, contactless smart switch, no noise and long life. Unlike contactors, only5000The service life is about 10 times, and it still makes a buzzing sound when welding.
3）8The gear-adjustable spot welding machine talks about the adjustable levels of current.8gear, for example30KVAButt welding machine, the maximum input current is78.9A, then78.9÷8=9.86A/file,2File is19.72A，3File is29.58AIn this way, the CNC spot welding machine is0-99The gear is adjustable, like this19.72-29.58The values between can also be adjusted accurately, just like tailor-made current, for better welding results.
4）8The time of the gear spot welding machine is completely controlled by humans, while the CNC spot welding machine is controlled by software and is more standard.
5) CNC stainless steel spot welding machine also has self-diagnosis, overheating alarm, self-protection, etc., and8There is no gear-adjustable spot welding machine.
Wuxi Xinxing Welding Equipment Factory,Focus on resistance welding machines29years, possessing core technology,Products include: semi-automatic butt welding machine, pneumatic butt welding machine, flash butt welding machine, medium frequency butt welding machine, hydraulic butt welding machine, large copper rod butt welding machine, automatic butt welding machine, special butt welding machine, foot pedal spot welding machine, pneumatic spot welding machine, medium frequency spot welding machine, automatic spot welding machine, multi-head spot welding machine, customized spot welding machine , projection welding machine, medium frequency projection welding machine, AC row welding machine, medium frequency row welding machine, automatic row welding mesh welding machine, AC seam welding machine, medium frequency seam welding machine, brazing machine diffusion welding machine, spark testing machine, ribbon meter printing machine, high-speed ribbon meter printing machine, unwinding machine, high-voltage test complete set of equipment, etc.300Many kinds, if you are interested in our welding equipment, please contact us:400-001-0502。
Hot product recommendations
