Language
The principle of UN6 water-cooled pneumatic butt welding machine
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
Your location: Home page > News Center > The principle of UN6 water-cooled pneumatic butt welding machine
The principle of UN6 water-cooled pneumatic butt welding machine
Release time:2022.03.14
Summary of information:
UN6 water-cooled pneumatic butt welding machine is the sixth generation butt welding machine independently developed and manufactured by Xinxing Welding. Compared with the previous five generations of resistance butt welding machines, it welds longer, better, faster, more accurately, has more adjustability, is safer, and has wider uses. It can not only butt conventional metal rods, pipes, profiles, and plates
UN6 water-cooled pneumatic butt welding machine is the sixth generation butt welding machine independently developed and manufactured by Xinxing Welding. Compared with the previous five generations of resistance butt welding machines, it welds longer, better, faster, more accurately, has more adjustability, is safer, and has wider uses. It can not only butt conventional metal rods, pipes, profiles, and plates, but can also weld multi-strand copper wires and aluminum wires, dissimilar metal copper tubes, and aluminum tubes (copper-aluminum tubes). There are many choices, including standard configuration, high-end configuration and non-standard options. Because it is often used for welding copper and aluminum pipes, it is also called internallyCopper and aluminum pipe butt welding machine
Its principle is quite simple
It is basically the same as resistance butt welding (butt welding), but it is very different from spot welding. One horizontal and one vertical, butt welding is vertically pressurized and clamped, and then the horizontal and transverse 0-degree upsetting (pushing) force is applied, and the left and right movements are used to weld; while the spot welding is vertically pressed at 90 degrees, and the up and down movements are welded. The butt welding operation is to clamp two metal workpieces left and right in a conductive electrode fixture so that they are end-to-end. Pressure is applied to make the current pass through the metal workpiece. The workpiece's own resistance heat is used to heat the workpiece to a plastic state, and then it is quickly extruded laterally to complete the welding.
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
Xinxing: Comparison between small medium frequency spot welding machine and ordinary power frequency spot welding machine
Summary of information:
The price of small medium frequency spot welding machine is 2 times more expensive than ordinary power frequency spot welding machine. It is powerful. When welding precision instruments, electrical devices, electronic parts, hardware, metal filaments and dissimilar metal workpieces, the workpiece will not deform or discolor, saves energy and power, and is fast. Its controller, current waveform and power frequency spot welding machine are all large.
The price of the small medium frequency spot welding machine is 2 times more expensive than the ordinary power frequency spot welding machine. It is powerful. When welding precision instruments, electrical devices, electronic parts, hardware, metal filaments and dissimilar metal workpieces, the workpiece does not deform or discolor, saves energy and electricity, and is fast. Its controller and current waveform are very different from those of the power frequency spot welding machine.
1. Small intermediate frequency spot welding machines use complex intermediate frequency controllers, and ordinary power frequency spot welding machines use microcomputer controllers.
Compared with ordinary power frequency controllers, intermediate frequency DC controllers have the following advantages
■Energy saving: high conversion efficiency, welding the same workpiece saves 30% energy than ordinary welding machines
■ DC output: Reduces welding induction energy loss. The continuous heat supply generated by the flat output current causes the nugget temperature to continuously rise. The same effect requires only lower welding current and pressure.
■Full-featured and easy to operate: comes with a color touch screen that can store data, count points, overheat protection, fault alarm, real-time monitoring, adjustment testing, etc.
■Precision control: The working frequency is high, usually 1000-4000Hz, and the control accuracy is 20-80 times that of ordinary spot welding machines.
■Millisecond-level speed: closed-loop control, voltage and current measurement and control feedback analysis and adjustment, ms-level.
■Suppression of splashing: Accurate control of the current rising slope and time will prevent the generation of spatter due to heat jumps and the inability to control the current rising time. Get stable and high-quality welding results.
■Beautiful solder joints: The welding heat-affected zone is small, and the solder joints do not deform or discolor.
■Three-stage heating process: preheating, welding, and tempering
■High automation: programmable 3-segment output, better adapted to PLC, robots, etc.
■Wide application: Aluminum, carbon steel, galvanized sheet, high-tensile steel, stainless steel, magnesium alloy, carbon steel, and titanium can be welded with various materials. The welding result is good, especially suitable for three-layer plate welding, welding of very thin materials, and precision welding requirements.
2. Comparison of the current waveform of small and medium frequency spot welding machines with that of ordinary power frequency spot welding machines.
Wuxi Xinxing Welding Equipment Factory has been focusing on resistance welding machines for 29 years and has core technologies. Its products include: copper rod and aluminum rod butt welding machines, steel bar butt welding machines, wire rope butt welding machines, copper and aluminum pipe butt welding machines, copper and aluminum row butt welding machines, flange butt welding machines, and multi-stranded copper wires. Aluminum wire butt welding machine, wheel shell flash butt welding machine, auto parts spot welding machine, sheet metal spot welding machine, home appliance hardware spot welding machine, electronic appliance spot welding machine, nut spot welding machine, stainless steel spot welding machine, foil strip spot welding machine, aluminum spot welding machine, multi-head spot welding machine, bag cage spot welding machine Machine, mesh welding machine, ton rack welding production line, resistance automatic welding machine, brazing machine, diffusion welding machine, energy storage spot welding machine, projection welding machine, medium frequency welding machine, automatic mesh welding machine, AC seam welding machine, medium frequency seam welding machine, brazing machine diffusion welding machine, There are more than 300 types of spark testing machines, ribbon meter printers, high-speed ribbon meter printers, unwinding machines, high-voltage test complete sets, etc. If you are interested in our welding equipment, please contact us: 400-001-0502.
Hot product recommendations
