If you want to know about resistance welding machine welding knowledge, welding methods and welding cases, you can find them here

Wuxi Welding specializes in the production of various models and specifications of butt welding machines. The UN-790 is a butt welding machine for large rods. It can weld 32mm copper rods, 40mm aluminum rods, and 40mm round steel. At present, domestic large butt welding machines can weld rods up to 40 mm in diameter. Others need to be customized, but it is not recommended to weld larger sections.

Wuxi Welding specializes in the production of various models and specifications of butt welding machines. The UN-790 is a butt welding machine for large rods. It can weld 32mm copper rods, 40mm aluminum rods, and 40mm round steel. At present, domestic large butt welding machines can weld rods up to 40 mm in diameter. Others need to be customized, but it is not recommended to weld larger sections.

Wuxi Welding has been producing various models and specifications of butt welding machines for 29 years. UN2S-50 is a more commonly used butt welding machine. The mainstream commonly used butt welding machine un2s-50: welding wire 2-18mm, copper rod 2-12mm, aluminum wire 3-10mm. There are many benefits to choosing a mainstream butt welding machine. The equipment market

Wuxi Welding has been producing various models and specifications of butt welding machines for 29 years. UN2S-50 is a more commonly used butt welding machine. The mainstream commonly used butt welding machine un2s-50: welding wire 2-18mm, copper rod 2-12mm, aluminum wire 3-10mm. There are many benefits to choosing a mainstream butt welding machine. The equipment market

Old-fashioned butt welding machines are mainly based on contactors. Mechanical aging and wear are the main causes of failure. They can be repaired by replacing switches, contactors, relays, etc.! Xinxing will choose first-line brand components, such as CJX2 series long-life contactors and NP2 metal push button switches, to extend the mechanical life as much as possible.

New butt welding machines are mainly based on thyristors. Electronic power components have theoretically no service life, but their overload capability is weak. To avoid overloading and over-range use, manufacturers generally install overheating protection. Xinxing will choose larger first-line brand components, such as MTK-200A, MTK-300A\MT

With the improvement of safety awareness, more and more attention has been paid to the protection of butt welding machines. Many companies have been notified during safety inspections to protect butt welding machines from splash. Xinxing Welding discovered and paid attention to this problem very early, and equipped the production with splash protection devices. Optional butt welding in UN2 series and UN2S series

The electrical safety of butt welding machine equipment has always been a focus of everyone's attention. The welding machine must comply with the national GB15578 safety standard. The insulation value of the butt welding machine can generally reach more than 3.5M ohms, and the grounding is good. However, there are occasional electrical accidents every year. For this reason, Xinxing specially installed safety insulated handrails for the new butt welding machine.

Many wire and cable factories need to butt 8mm copper rods or 9.5mm aluminum rods when drawing. Here is a semi-automatic butt welding machine that is very cost-effective. Come and take a look with me.