Language
The function of oil-water separator on flash butt welding machine
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
The role of oil-water separator on flash butt welding machine-Xinxing Welding
Release time:2022.01.24
Summary of information:
As the name suggests, the oil-water separator is a device that separates oil and water. It is also called a two-part device. When the flash butt welding machine is used, the compressed air passes through it, causing a sharp change in the flow direction and speed. Relying on the action of inertia, the oil-water separator separates oil droplets and water droplets that are denser than the compressed air.
As the name suggests, the oil-water separator is a device that separates oil and water. It is also called a two-part unit.Flash butt welding machinewhile usingCompressionThe air passes through it, causing drastic changes in flow direction and speed. Relying on inertia, the oil-water separator separates oil droplets and water droplets that are denser than compressed air.
1.Types of oil-water separators
It is divided into annular rotary oil-water separator and impact oil-water separator.
1) Annular rotary oil-water separator: After the compressed air enters the oil-water separator housing from the inlet, the air flow is first blocked by the partition and turns downward, and then rises upward again, resulting in annular rotation. In this way, water droplets and oil droplets are separated from the air and settle at the bottom of the shell under the action of centrifugal force and inertial force.
2) Impact oil-water separator uses stainless steel wire mesh coalescing filler inside, and the shell is made of steel welded tank structure. The general operating pressure is 0.1Mpa--2. 5Mpa. Its principle is to use the organic combination of cyclone and stainless steel wire mesh to capture mist. At the same time, it adopts mechanisms such as direct interception, inertial collision, Brownian diffusion and condensation. It can effectively remove dust, water and oil mist in compressed air. It has a large water and oil removal capacity and can adapt to a wide range of working conditions.
When gases such as compressed air containing oil and water pass into the oil-water separator, large droplets fall to the bottom of the oil-water separator under the action of gravity. Small mist-like droplets are captured by the wire mesh and condense into large droplets that fall to the bottom of the oil-water separator. The entrained liquid is thus separated, and the separated liquid flows into the lower part and is discharged by manually opening the valve or installing an air drain valve in the lower part.
2.oil water separatorfunction
Its main function is to purify compressed air. Since the temperature of the compressed air discharged from the air compressor is very high, reaching about 140-170°C, moisture and oil are mixed in the compressed air in the form of gas. After passing through the cooler, part of the oil and water is separated, and oil mist and water mist will appear in the air source. Therefore, a compressed air oil-water separation filter is needed to filter oil mist and water mist. In order to achieve clean compressed air that meets the needs of enterprises.
Wuxi Xinxing Welding Equipment Factory was founded in 1993. It is a resistance welding machine manufacturer with 29 years of innovation and development. The products it produces and sells include: spot welding machine, iron sheet spot welding machine, copper sheet spot welding machine, aluminum foil spot welding machine, stainless steel spot welding machine, aluminum plate spot welding machine, stencil spot welding machine, microelectronic spot welding machine, butt welding machine, copper rod butt welding machine, iron wire butt welding machine, steel bar butt welding machine,Aluminum rod butt welding machine, titanium wire butt welding machine, alloy wire butt welding machine, steel ring butt welding machine, wheel hub butt welding machine, copper and aluminum butt welding machine, copper and aluminum pipe butt welding machine, etc., whether semi-automatic or automatic, we have them all, with excellent quality, favorable price, and many cases. Welcome to consult and purchase!
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
The role of oil-water separator on flash butt welding machine-Xinxing Welding
Summary of information:
As the name suggests, the oil-water separator is a device that separates oil and water. It is also called a two-part device. When the flash butt welding machine is used, the compressed air passes through it, causing a sharp change in the flow direction and speed. Relying on the action of inertia, the oil-water separator separates oil droplets and water droplets that are denser than the compressed air.
As the name suggests, the oil-water separator is a device that separates oil and water. It is also called a two-part unit.Flash butt welding machinewhile usingCompressionThe air passes through it, causing drastic changes in flow direction and speed. Relying on inertia, the oil-water separator separates oil droplets and water droplets that are denser than compressed air.
1.Types of oil-water separators
It is divided into annular rotary oil-water separator and impact oil-water separator.
1) Annular rotary oil-water separator: After the compressed air enters the oil-water separator housing from the inlet, the air flow is first blocked by the partition and turns downward, and then rises upward again, resulting in annular rotation. In this way, water droplets and oil droplets are separated from the air and settle at the bottom of the shell under the action of centrifugal force and inertial force.
2) Impact oil-water separator uses stainless steel wire mesh coalescing filler inside, and the shell is made of steel welded tank structure. The general operating pressure is 0.1Mpa--2. 5Mpa. Its principle is to use the organic combination of cyclone and stainless steel wire mesh to capture mist. At the same time, it adopts mechanisms such as direct interception, inertial collision, Brownian diffusion and condensation. It can effectively remove dust, water and oil mist in compressed air. It has a large water and oil removal capacity and can adapt to a wide range of working conditions.
When gases such as compressed air containing oil and water pass into the oil-water separator, large droplets fall to the bottom of the oil-water separator under the action of gravity. Small mist-like droplets are captured by the wire mesh and condense into large droplets that fall to the bottom of the oil-water separator. The entrained liquid is thus separated, and the separated liquid flows into the lower part and is discharged by manually opening the valve or installing an air drain valve in the lower part.
2.oil water separatorfunction
Its main function is to purify compressed air. Since the temperature of the compressed air discharged from the air compressor is very high, reaching about 140-170°C, moisture and oil are mixed in the compressed air in the form of gas. After passing through the cooler, part of the oil and water is separated, and oil mist and water mist will appear in the air source. Therefore, a compressed air oil-water separation filter is needed to filter oil mist and water mist. In order to achieve clean compressed air that meets the needs of enterprises.
Wuxi Xinxing Welding Equipment Factory was founded in 1993. It is a resistance welding machine manufacturer with 29 years of innovation and development. The products it produces and sells include: spot welding machine, iron sheet spot welding machine, copper sheet spot welding machine, aluminum foil spot welding machine, stainless steel spot welding machine, aluminum plate spot welding machine, stencil spot welding machine, microelectronic spot welding machine, butt welding machine, copper rod butt welding machine, iron wire butt welding machine, steel bar butt welding machine,Aluminum rod butt welding machine, titanium wire butt welding machine, alloy wire butt welding machine, steel ring butt welding machine, wheel hub butt welding machine, copper and aluminum butt welding machine, copper and aluminum pipe butt welding machine, etc., whether semi-automatic or automatic, we have them all, with excellent quality, favorable price, and many cases. Welcome to consult and purchase!
Hot product recommendations
