Language
Xinxing Welding Machine tells you how to wire and install switches for spot welding and butt welding machines.
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
Xinxing Welding Machine tells you how to wire and install switches for spot welding and butt welding machines.
Release time:2021.09.07
Summary of information:
Since Xinxing Welding Machine has been producing resistance welding machines for 28 years, we have often encountered customers asking questions such as how big a wire should be connected to a spot welding machine and how big a switch should be installed on a butt welding machine. Today, I will make a table and use data to tell newbies how to choose.
spot welding machineButt welding machinewiring
Jiangsu factories now have a high turnover of personnel. Whenever new management or operators are replaced and a new welding machine is purchased, they need to face the problem of independent wiring and switching of the spot welding machine. Xinxing Welding Machine28In the past few years, I have encountered many customers asking about wiring problems. Today I am writing this article specifically. I hope you can save it for easy reference.
1、Choose a power source specified in the instructions, such as single phase220Vor three phases380VWait.
2. Select the power cord and grounding wire within the recommended range. The capacity of spot welding machines and butt welding machines is generally relatively large, so it is not advisable to use too long power cords, otherwise it will increase the voltage drop on the line.
Wiring and switch specifications reference table
PowerKVA
Rated input currentA
Power wiring specificationsmm2
Switch specificationsA
Ground wire specifications
mm2
16
42
6
50
2.5
25
65
10
100
2.5
30
78
16
100
4
50
131
25
150
4
75
197
35
200
4
100
263
50
300
6
160
421
70
450
10
200
526
90
600
16
PowerKVA
Rated input currentA
Power wiring specificationsmm2
Switch specificationsA
Ground wire specifications
mm2
16
42
6
50
2.5
25
65
10
100
2.5
30
78
16
100
4
50
131
25
150
4
75
197
35
200
4
100
263
50
300
6
160
421
70
450
10
200
526
90
600
16
Wuxi Xinxing Welding Equipment Factory, formerly known as Wuxi County Industrial School Automatic Control Equipment Factory, was established in 1993 and has been focusing on resistors for 28 years.Welding machine manufacturer, has a 12,500 square meter production base, 4 production workshops, 50+ personnel, and serves more than 5,000+ corporate customers. The products mainly include: butt welding machine, flash butt welding machine, spot welding machine, variable frequency AC spot projection welding machine, medium frequency inverter DC spot projection welding machine, row welding machine,Automatic welding machine, various customized special welding machines, etc., with high quality and wide application, please call us for consultation!
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
Xinxing Welding Machine tells you how to wire the spot welding machine and install the switch
Summary of information:
Since Xinxing Welding Machine has been producing resistance welding machines for 28 years, we often encounter customers asking questions such as how big a wire should be connected to a spot welding machine and how big a switch should be installed on a butt welding machine. Today I will make a table and use data to tell you how to choose.
Spot welding machine butt welding machine wiring
Jiangsu factories now have a high turnover of personnel. Whenever new management or operators are replaced, and new welding machines are purchased, they need to deal with spot welding machines.Butt welding machineIndependent wiring and switching problems, Xinxing welding machine28In the past few years, I have encountered many customers asking about wiring problems. Today I am writing this article specifically. I hope you can save it for easy reference.
1、Choose a power source specified in the instructions, such as single phase220Vor three phases380VWait.
2. Select the power cord and grounding wire within the recommended range. The capacity of spot welding machines and butt welding machines is generally relatively large, so it is not advisable to use too long power cords, otherwise it will increase the voltage drop on the line.
Wiring and switch specifications reference table
PowerKVA
Rated input currentA
Power wiring specificationsmm2
Switch specificationsA
Ground wire specifications
mm2
16
42
6
50
2.5
25
65
10
100
2.5
30
78
16
100
4
50
131
25
150
4
75
197
35
200
4
100
263
50
300
6
160
421
70
450
10
200
526
90
600
16
NoneXishi Xinxing Welding Equipment Factory, formerly known as Wuxi County Industrial School Automatic Control Equipment Factory, was established in 1993 and is a resistance welding machine manufacturer with 28 years of focus.home, has a 12,500 square meter production base, 4 production workshops, 50+ personnel, and serves more than 5,000+ corporate customers. The products mainly include: butt welding machine, flash butt welding machine, spot welding machine, variable frequency AC spot projection welding machine, medium frequency inverter DC spot projection welding machine,Array welding machine、Automatic welding machine, various customized special welding machines, etc., with high quality and wide application, please call us for consultation!
1、Choose a power source specified in the instructions, such as single phase220Vor three phases380VWait.
2. Select the power cord and grounding wire within the recommended range. The capacity of spot welding machines and butt welding machines is generally relatively large, so it is not advisable to use too long power cords, otherwise it will increase the voltage drop on the line.
|
PowerKVA |
Rated input currentA |
Power wiring specificationsmm2 |
Switch specificationsA |
Ground wire specifications mm2 |
|
16 |
42 |
6 |
50 |
2.5 |
|
25 |
65 |
10 |
100 |
2.5 |
|
30 |
78 |
16 |
100 |
4 |
|
50 |
131 |
25 |
150 |
4 |
|
75 |
197 |
35 |
200 |
4 |
|
100 |
263 |
50 |
300 |
6 |
|
160 |
421 |
70 |
450 |
10 |
|
200 |
526 |
90 |
600 |
16 |
NoneXishi Xinxing Welding Equipment Factory, formerly known as Wuxi County Industrial School Automatic Control Equipment Factory, was established in 1993 and is a resistance welding machine manufacturer with 28 years of focus.home, has a 12,500 square meter production base, 4 production workshops, 50+ personnel, and serves more than 5,000+ corporate customers. The products mainly include: butt welding machine, flash butt welding machine, spot welding machine, variable frequency AC spot projection welding machine, medium frequency inverter DC spot projection welding machine,Array welding machine、Automatic welding machine, various customized special welding machines, etc., with high quality and wide application, please call us for consultation!
Hot product recommendations
