Language
What are the characteristics of medium frequency spot welding machine? Xinxing welding machine explains for you
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
What are the operating procedures and maintenance of medium frequency spot welding machines? Xinxing welding machine explains to you
Release time:2021.07.19
Summary of information:
Many people have lost the instruction manual shortly after buying the machine, including the editor. Today I will write down the operating procedures and maintenance of the mid-frequency spot welding machine for everyone's reference.
Wuxi Xinxing Welding Equipment FactoryWhat are the operating procedures and maintenance of medium frequency spot welding machines?
1.operating procedures
1. moveMedium frequency spot welding machinePlease usewelding machineRing at the top.
2. Before starting,Ground it reliably first, and thenConnect the water source, air source, and finally the power supply.
3. According to the capacity of the welding machine, power supply equipment with sufficient capacity should be configured to ensure that the power supply voltage fluctuates up and down during welding.±10%Within.
4. The air source oil-water separator must be replenished regularlyAdd lubricating oil to the lubricator in the mist, and do not cut off the oil.
5. Medium frequency spot welding machineAfter powering on, check the electrical equipment, operating mechanism, cooling system, gas circuit system and body shell for leakage. If there is a leakage of electricity, you should immediatelyShutdown for maintenance。
6. Before operation, the oil stains on the upper and lower electrodes should be removed.The electrode head should be smoothed at any time during use and maintain a certain contact surface with the workpiece. Only in this way can the quality of solder joints be guaranteed.
7. If the welding parts are rusty or severely oily, they should be cleaned before welding.
8. During operation, the air path and water cooling system should be smooth. The gas should be kept dry. Drainage temperature must not exceed50℃, the drainage volume can be adjusted according to the temperature.
9. WhenMedium frequency spot welding machineWhen out of service for a long time, power should be turned on every month30 minutes。
10. Welding operators and cooperating personnel must wear labor protection equipment in accordance with regulations. Safety measures must be taken to prevent accidents such as electric shock, falling, fire, etc.
11. When used outdoors, should be equipped with rainproof, moisture-proof and sun-proofTopThe shed should be equipped with corresponding fire-fighting equipment.
12. Welding and removing welding slagWear protective glasses and keep your head away from the direction of welding slag splashing.
13. When working in wet areas, operators should stand on a place covered with insulating materials and wear insulating shoes.
14. The controller must be maintained and corrected by dedicated personnel.
15. The welding machine should be placed in a ventilated, dry and corrosive gas-free place.
2.Medium frequency spot welding machineWelding machine maintenance
1. Please confirmMedium frequency spot welding machineTechnical parameters on the sign to avoid unreasonable use.
2. at least every6The month must be correctwelding machineCarry out an overhaul. Ensure good and reliable contact between copper conductors and sufficient contact surface. If there is oxide layer or carbon deposit, please clean it immediately and use sandpaper to polish it.
3. Avoid overloading. Severe overloading will burn the machine, and if it is not burned, the service life will be shortened.
4. Try to use a power supply with stable voltage.
Wuxi Xinxing Welding Equipment Factory takes promoting the development of the welding industry as its own responsibility and serving customers as its purpose. We hope to solve welding problems for customers and provide better welding equipment and services. The main equipment includes: butt welding machines, spot welding machines, variable frequency AC spot welding machines, medium frequency inverter DC spot welding machines and other products. Welcome to consult and purchase.
Medium frequency spot welding machine website:http://www.xxdgsb.com/zpnbzldt.html
>Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
What are the operating procedures and maintenance of medium frequency spot welding machines? Xinxing welding machine explains to you
Release time:2021.07.19
Summary of information:
Many people have lost the instruction manual shortly after buying the machine, including the editor. Today I will write down the operating procedures and maintenance of the mid-frequency spot welding machine for everyone's reference.
Wuxi Xinxing Welding Equipment FactoryWhat are the operating procedures and maintenance of medium frequency spot welding machines?
1.operating procedures
1. moveMedium frequency spot welding machinePlease usewelding machineRing at the top.
2. Before starting,Ground it reliably first, and thenConnect the water source, air source, and finally the power supply.
3. According to the capacity of the welding machine, power supply equipment with sufficient capacity should be configured to ensure that the power supply voltage fluctuates up and down during welding.±10%Within.
4. The air source oil-water separator must be replenished regularlyAdd lubricating oil to the lubricator in the mist, and do not cut off the oil.
5. Medium frequency spot welding machineAfter powering on, check the electrical equipment, operating mechanism, cooling system, gas circuit system and body shell for leakage. If there is a leakage of electricity, you should immediatelyShutdown for maintenance。
6. Before operation, the oil stains on the upper and lower electrodes should be removed.The electrode head should be smoothed at any time during use and maintain a certain contact surface with the workpiece. Only in this way can the quality of solder joints be guaranteed.
7. If the welding parts are rusty or severely oily, they should be cleaned before welding.
8. During operation, the air path and water cooling system should be smooth. The gas should be kept dry. Drainage temperature must not exceed50℃, the drainage volume can be adjusted according to the temperature.
9. WhenMedium frequency spot welding machineWhen out of service for a long time, power should be turned on every month30 minutes。
10. Welding operators and cooperating personnel must wear labor protection equipment in accordance with regulations. Safety measures must be taken to prevent accidents such as electric shock, falling, fire, etc.
11. When used outdoors, should be equipped with rainproof, moisture-proof and sun-proofTopThe shed should be equipped with corresponding fire-fighting equipment.
12. Welding and removing welding slagWear protective glasses and keep your head away from the direction of welding slag splashing.
13. When working in wet areas, operators should stand on a place covered with insulating materials and wear insulating shoes.
14. The controller must be maintained and corrected by dedicated personnel.
15. The welding machine should be placed in a ventilated, dry and corrosive gas-free place.
2.Medium frequency spot welding machineWelding machine maintenance
1. Please confirmMedium frequency spot welding machineTechnical parameters on the sign to avoid unreasonable use.
2. at least every6The month must be correctwelding machineCarry out an overhaul. Ensure good and reliable contact between copper conductors and sufficient contact surface. If there is oxide layer or carbon deposit, please clean it immediately and use sandpaper to polish it.
3. Avoid overloading. Severe overloading will burn the machine, and if it is not burned, the service life will be shortened.
4. Try to use a power supply with stable voltage.
Wuxi Xinxing Welding Equipment Factory takes promoting the development of the welding industry as its own responsibility and serving customers as its purpose. We hope to solve welding problems for customers and provide better welding equipment and services. The main equipment includes: butt welding machines, spot welding machines, variable frequency AC spot welding machines, medium frequency inverter DC spot welding machines and other products. Welcome to consult and purchase.
Medium frequency spot welding machine website:http://www.xxdgsb.com/zpnbzldt.html
>Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.