Language
UN1S butt welding machine 33JR controller manual
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
Your location: Home page > News Center > UN1S Butt Welding Machine Controller Manual-Xinxing Welding
UN1S Butt Welding Machine Controller Manual-Xinxing Welding
Release time:2022.02.19
Summary of information:
Thanks for using the UN1S butt welding machine. The 33JR controller is equivalent to the brain of the uN1S butt welding machine. It controls the two main elements of the welding machine: welding time and current. In order to maximize its effectiveness, please read its instructions carefully!
1. UN1SButt welding machine33JRController manual
(1)Advantages and Features
1、suppress sparksFunction:It has a slow-rising function, which can suppress the splashing phenomenon of sparks and is suitable for welding of different materials.
2、selfDiagnostic functions:Can automatically detect operating conditions, if a fault occurs, it will prompt that ER1 is connected and ER2 is not connected.
3、overheatingAlarm：interior85 degree temperature control switch, if overloaded, resulting in over-temperature, the ER3 overheating alarm will be displayed and the device will automatically stop.
4、Two startup methods are available:Factory default level start, keep pressing the button to weld, and stop when you release it. Change the pulse start, click the button, and the automatic welding will automatically turn off.
5、Simple communication output function：A signal can be sent out after welding is completed, used to connectPLC and other equipment for automated control.
6.currentand time accuracyAdjustable: Welding current heat1-99% adjustment range is wider,Welding time0-99 cycles are adjustable, and the time is applicable to a wider range
（2) FunctionIntroduction
1、Power indicator light:Lights up when power is on
2、Start indicator light:Lights up when the starter switch is closed
3、Welding indicator light:Lights up when the transformer is powered on for welding
4、Fault alarm indicator light:When there is a thyristor straight-through, the thyristor does not conduct, or overheats, the corresponding indicator light will light up.
5、Slow rise:The operating current is from0 The time to rise to the welding current at a constant speed, setting range: 0-99, unit: cycle
6、Current:Welding current setting value, the setting value is the percentage of the total power of the welding machine, the setting range:0-99, when set to 0, the minimum output is about 30% of the total power; when set to 99, the maximum power output
7、Time:The duration of the welding current on the workpiece, setting range0-99, unit: cycle; when set to 0, there is no welding current; when set to 99, there is continuous welding.
8、△, ▽ keys:Corresponding to the addition and subtraction of each parameter respectively;On/off key:When the controller is on, press and hold the switch key to5 seconds to enter/exit the secondary menu. After an error occurs in the controller, this key can be used to clear the error.
(3) 2level menusettings
（Factory setgoodPlease do not modify it unless necessary)Keep pressingPress the "switch" key for about 5 seconds to enter or exit the secondary menu. After entering the secondary menu, the slowly rising window displays parameter P, and the time window displays the parameter value:
|
parameters |
set value |
Description |
|
P |
0 |
Pulse signal start, debounce (applicable to foot switch) |
|
1 |
Pulse signal start, quick response (suitable for mechanical electric shock start) |
|
|
2Default |
The switch signal starts, welding starts when the switch is closed, and stops welding when it is opened. |
(four）Technical parameters
ProjectParameter value
working environmentTemperature ≤45℃; humidity ≤85% (no dew); no strong magnetic field; no severe vibration and impact; no corrosion and conductive gas
electricitySource Single-phase AC 380V±10%, 50Hz±1%
driving abilitySCR (module), rated current ≤2000A
(five) errorTips
During the working process, if the controller detects the following conditions, it will automatically turn off the output and prompt:
|
serial number |
code name |
meaning |
Fault display reason |
|
1 |
Er1 |
Thyristor pass-through |
When the controller has no output, it detects that the thyristor single or double tube is conductive. |
|
2 |
Er2 |
The thyristor does not conduct |
When the controller outputs pulses, it detects that the thyristor single or double tube is cut off. |
|
3 |
Er3 |
overheating |
When an external thermal protection switch is connected, the switch operates or is abnormal. |
Xinxing Welding, 29 yearsResistance welding machineOld brands, whether it is steel bar butt welding machine, copper wire butt welding machine, aluminum rod butt welding machine, spot welding machine, copper strip spot welding machine, steel strip spot welding machine, strap spot welding machine, iron sheet spot welding machine, steel plate spot welding machine, aluminum plate spot welding machine or multi-head grid spot welding machine, multi-head bag cage spot Customized spot welding machines for various industries; automatic or semi-automatic, are popular among new and old customers because of their high quality, suitable for workpieces, and reasonable prices. If you are also interested in our welding equipment, please contact us: 400-001-0502.
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
UN1S Butt Welding Machine Controller Manual-Xinxing Welding
Summary of information:
Thanks for using the UN1S butt welding machine. The 33JR controller is equivalent to the brain of the uN1S butt welding machine. It controls the two main elements of the welding machine: welding time and current. In order to maximize its effectiveness, please read its instructions carefully!
1. UN1SButt welding machine33JRController manual
(1)Advantages and Features
1、suppress sparksFunction:It has a slow-rising function, which can suppress the splashing phenomenon of sparks and is suitable for welding of different materials.
2、selfDiagnostic functions:Can automatically detect operating conditions, if a fault occurs, it will prompt that ER1 is connected and ER2 is not connected.
3、overheatingAlarm：interior85 degree temperature control switch, if overloaded, resulting in over-temperature, the ER3 overheating alarm will be displayed and the device will automatically stop.
4、Two startup methods are available:Factory default level start, keep pressing the button to weld, and stop when you release it. Change the pulse start, click the button, and the automatic welding will automatically turn off.
5、Simple communication output function：A signal can be sent out after welding is completed, used to connectPLC and other equipment for automated control.
6.currentand time accuracyAdjustable: Welding current heat1-99% adjustment range is wider,Welding time0-99 cycles are adjustable, and the time is applicable to a wider range
（2) FunctionIntroduction
1、Power indicator light:Lights up when power is on
2、Start indicator light:Lights up when the starter switch is closed
3、Welding indicator light:Lights up when the transformer is powered on for welding
4、Fault alarm indicator light:When there is a thyristor straight-through, the thyristor does not conduct, or overheats, the corresponding indicator light will light up.
5、Slow rise:The operating current is from0 The time to rise to the welding current at a constant speed, setting range: 0-99, unit: cycle
6、Current:Welding current setting value, the setting value is the percentage of the total power of the welding machine, the setting range:0-99, when set to 0, the minimum output is about 30% of the total power; when set to 99, the maximum power output
7、Time:The duration of the welding current on the workpiece, setting range0-99, unit: cycle; when set to 0, there is no welding current; when set to 99, there is continuous welding.
8、△, ▽ keys:Corresponding to the addition and subtraction of each parameter respectively;On/off key:When the controller is on, press and hold the switch key to5 seconds to enter/exit the secondary menu. After an error occurs in the controller, this key can be used to clear the error.
(3) 2level menusettings
（Factory setgoodPlease do not modify it unless necessary)Keep pressingPress the "switch" key for about 5 seconds to enter or exit the secondary menu. After entering the secondary menu, the slowly rising window displays parameter P, and the time window displays the parameter value:
|
parameters |
set value |
Description |
|
P |
0 |
Pulse signal start, debounce (applicable to foot switch) |
|
1 |
Pulse signal start, quick response (suitable for mechanical electric shock start) |
|
|
2Default |
The switch signal starts, welding starts when the switch is closed, and stops welding when it is opened. |
(four）Technical parameters
ProjectParameter value
working environmentTemperature ≤45℃; humidity ≤85% (no dew); no strong magnetic field; no severe vibration and impact; no corrosion and conductive gas
electricitySource Single-phase AC 380V±10%, 50Hz±1%
driving abilitySCR (module), rated current ≤2000A
(five) errorTips
During the working process, if the controller detects the following conditions, it will automatically turn off the output and prompt:
|
serial number |
code name |
meaning |
Fault display reason |
|
1 |
Er1 |
Thyristor pass-through |
When the controller has no output, it detects that the thyristor single or double tube is conductive. |
|
2 |
Er2 |
The thyristor does not conduct |
When the controller outputs pulses, it detects that the thyristor single or double tube is cut off. |
|
3 |
Er3 |
overheating |
When an external thermal protection switch is connected, the switch operates or is abnormal. |
Xinxing Welding, 29 yearsResistance welding machineOld brands, whether it is steel bar butt welding machine, copper wire butt welding machine, aluminum rod butt welding machine, spot welding machine, copper strip spot welding machine, steel strip spot welding machine, strap spot welding machine, iron sheet spot welding machine, steel plate spot welding machine, aluminum plate spot welding machine or multi-head grid spot welding machine, multi-head bag cage spot Customized spot welding machines for various industries; automatic or semi-automatic, are popular among new and old customers because of their high quality, suitable for workpieces, and reasonable prices. If you are also interested in our welding equipment, please contact us: 400-001-0502.
Hot product recommendations
