Language
Principle and function of the two-piece assembly of iron ring and copper ring pneumatic butt welding machine
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
Principle and function of the two-piece assembly of iron ring and copper ring pneumatic butt welding machine
Release time:2022.03.10
Summary of information:
The iron ring and copper ring pneumatic butt welding machine is the UNQ series welding machine among the Xinxing welding pneumatic butt welding machines. It is also a type of resistance welding machine. It uses gas thrust to pressurize and upset. It can easily butt various metal rings such as steel rings, iron rings and buckles, aluminum rings, copper rings, D-shaped rings, and galvanized packages.
Iron ring copper ring pneumatic butt welding machine is a new star welding machinePneumatic butt welding machineAmong them, the UNQ series welding machine is also a type of resistance welding machine. It uses gas thrust to pressurize and upset. It can easily connect various metal rings such as steel rings, iron rings, aluminum rings, copper rings, D-shaped rings, galvanized buckles, chains, titanium rings and other materials.
As the name suggests, the oil-water separator is a device that separates oil from water. It is also called a two-part device. When compressed air passes through it, it causes a sharp change in flow direction and speed. Relying on the action of inertia, the oil-water separator separates oil droplets and water droplets that are denser than compressed air.
1. It is divided into annular rotary oil-water separator and impact oil-water separator.
1) Annular rotary oil-water separator: After the compressed air enters the oil-water separator shell from the inlet, the air flow is first blocked by the partition and hits back downwards, and then rises upward again, resulting in annular rotation. In this way, water droplets and oil droplets are separated from the air and settle at the bottom of the shell under the action of centrifugal force and inertial force.
2) Impact oil-water separator, the interior uses stainless steel wire mesh coalescing filler, the shell is made of steel welded tank structure, the general operating pressure is 0.1Mpa--2. 5Mpa. Its principle is to use the organic combination of cyclone and stainless steel wire mesh to capture mist. At the same time, it adopts mechanisms such as direct interception, inertial collision, Brownian diffusion and condensation. It can effectively remove dust, water and oil mist in compressed air. It has a large water and oil removal capacity and can adapt to a wide range of working conditions.
When gases such as compressed air containing oil and water pass into the oil-water separator, large droplets fall to the bottom of the oil-water separator under the action of gravity. Small mist-like droplets are captured by the wire mesh and condense into large droplets that fall to the bottom of the oil-water separator. The entrained liquid is thus separated, and the separated liquid flows into the lower part and is discharged by manually opening the valve or installing an air drain valve in the lower part.
2. Function
Its main function is to purify compressed air. Since the temperature of the compressed air discharged from the air compressor is very high, reaching about 140-170°C, moisture and oil are mixed in the compressed air in the form of gas. After passing through the cooler, part of the oil and water is separated, and oil mist and water mist will appear in the air source. Therefore, a compressed air oil-water separation filter is needed to filter oil mist and water mist. In order to achieve clean compressed air that meets the needs of enterprises.
Xinxing Welding Equipment Factory has focused on resistance welding machines for 29 years and has more than 300 product styles, whether it is automatic or manual butt welding machines used in wire and cable, wire drawing, welding wire, construction, hardware processing, non-ferrous metal industries, stationary butt welding machines or mobile butt welding machines, low-power butt welding machines or high-power butt welding machines, whether it is used in machinery manufacturing, automobile manufacturing, environmentally friendly bag cages, chemical tonnage barrels, hardware appliances, filters, instruments and other industries.spot welding machineMedium frequency spot welding machines and automated welding production lines are also covered. Whether it is a small resistance brazing machine or a large brazing machine for motors and UHV, it can be customized according to the characteristics of the workpiece. Seam welding machines, projection welding machines, and row welding machines are also available. If you are interested in our welding equipment, please contact us: 400-001-0502.
As the name suggests, the oil-water separator is a device that separates oil from water. It is also called a two-part device. When compressed air passes through it, it causes a sharp change in flow direction and speed. Relying on the action of inertia, the oil-water separator separates oil droplets and water droplets that are denser than compressed air.
1. It is divided into annular rotary oil-water separator and impact oil-water separator.
1) Annular rotary oil-water separator: After the compressed air enters the oil-water separator shell from the inlet, the air flow is first blocked by the partition and hits back downwards, and then rises upward again, resulting in annular rotation. In this way, water droplets and oil droplets are separated from the air and settle at the bottom of the shell under the action of centrifugal force and inertial force.
2) Impact oil-water separator, the interior uses stainless steel wire mesh coalescing filler, the shell is made of steel welded tank structure, the general operating pressure is 0.1Mpa--2. 5Mpa. Its principle is to use the organic combination of cyclone and stainless steel wire mesh to capture mist. At the same time, it adopts mechanisms such as direct interception, inertial collision, Brownian diffusion and condensation. It can effectively remove dust, water and oil mist in compressed air. It has a large water and oil removal capacity and can adapt to a wide range of working conditions.
When gases such as compressed air containing oil and water pass into the oil-water separator, large droplets fall to the bottom of the oil-water separator under the action of gravity. Small mist-like droplets are captured by the wire mesh and condense into large droplets that fall to the bottom of the oil-water separator. The entrained liquid is thus separated, and the separated liquid flows into the lower part and is discharged by manually opening the valve or installing an air drain valve in the lower part.
2. Function
Its main function is to purify compressed air. Since the temperature of the compressed air discharged from the air compressor is very high, reaching about 140-170°C, moisture and oil are mixed in the compressed air in the form of gas. After passing through the cooler, part of the oil and water is separated, and oil mist and water mist will appear in the air source. Therefore, a compressed air oil-water separation filter is needed to filter oil mist and water mist. In order to achieve clean compressed air that meets the needs of enterprises.
Xinxing Welding Equipment Factory has focused on resistance welding machines for 29 years and has more than 300 product styles, whether it is automatic or manual butt welding machines used in wire and cable, wire drawing, welding wire, construction, hardware processing, non-ferrous metal industries, stationary butt welding machines or mobile butt welding machines, low-power butt welding machines or high-power butt welding machines, whether it is used in machinery manufacturing, automobile manufacturing, environmentally friendly bag cages, chemical tonnage barrels, hardware appliances, filters, instruments and other industries.spot welding machineMedium frequency spot welding machines and automated welding production lines are also covered. Whether it is a small resistance brazing machine or a large brazing machine for motors and UHV, it can be customized according to the characteristics of the workpiece. Seam welding machines, projection welding machines, and row welding machines are also available. If you are interested in our welding equipment, please contact us: 400-001-0502.
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
What is the electrode shape of DN1S CNC stainless steel spot welding machine?
Summary of information:
When the DN1S CNC stainless steel spot welding machine is welding various metal plates, sheet metal parts, wire rods, and wire mesh, the electrodes used in large quantities are often straight electrodes with the same upper and lower specifications. In Xinxing Welding's 29 years of practical experience, we often encounter workpieces of various shapes, and the electrodes must adapt to the workpieces for welding. Therefore,
When the DN1S CNC stainless steel spot welding machine is welding various metal plates, sheet metal parts, wires, and wire mesh, the electrodes used in large quantities are often straight electrodes with the same upper and lower specifications. In Xinxing Welding's 29 years of practical experience, we often encounter workpieces of various shapes, and the electrodes must adapt to the workpieces for welding, so there are many shapes.
The editor has seen the electrode shapes of the DN1S CNC stainless steel spot welding machine, which is a foot-operated spot welding machine:
1. Straight electrodes, the same length and size from top to bottom
2. Straight electrodes have the same diameter but the upper electrode is longer, some as long as 1 meter, and the lower electrode is shorter, as short as 3cm.
3. S-bend electrode, S-bend shape with the same upper and lower diameters and the same length, is often used in welding fan casings
4. Lightning-type bent electrode, often used for welding bag cage bottom
5. Z+7 frame-shaped bent electrode, used for welding stainless steel at 45-degree diagonal angles
6. 7-shaped curved electrode, straight up and 7 curves down
7. 6-shaped, straight up and 6 bends down
Wuxi Xinxing Welding Equipment Factory has been focusing on resistance welding machines for 29 years and has core technologies. Its products include: copper rod and aluminum rod butt welding machines, steel bar butt welding machines, wire rope butt welding machines, copper and aluminum pipe butt welding machines, copper and aluminum row butt welding machines, flange butt welding machines, and multi-stranded copper wires. Aluminum wire butt welding machine, wheel shell flash butt welding machine, auto parts spot welding machine, sheet metal spot welding machine, home appliance hardware spot welding machine, electronic appliance spot welding machine, nut spot welding machine, stainless steel spot welding machine, foil strip spot welding machine, aluminum spot welding machine, multi-head spot welding machine, bag cage spot welding machine Machine, mesh welding machine, ton rack welding production line, resistance automatic welding machine, brazing machine, diffusion welding machine, energy storage spot welding machine, projection welding machine, medium frequency welding machine, automatic mesh welding machine, AC seam welding machine, medium frequency seam welding machine, brazing machine diffusion welding machine, There are more than 300 types of spark testing machines, ribbon meter printers, high-speed ribbon meter printers, unwinding machines, high-voltage test complete sets, etc. If you are interested in our welding equipment, please contact us: 400-001-0502.
Hot product recommendations
