Language
Why does Xinxing small medium frequency spot welding machine not need water cooling?
Wuxi Xinxing Welding Equipment Factory mainly produces: spot welding machines, butt welding machines, flash butt welding machines, medium frequency spot welding machines, energy storage spot welding machines, nut spot welding machines, polymer diffusion welding machines and other resistance welding equipment! QQ online consultationSitemapContact us
Xinxing. Intelligent resistance welding equipment and solution service provider 33 years of deep experience in the industry help companies solve difficult welding problems and improve welding efficiency!
National service hotline:400-001-050213395100070
Why does Xinxing small medium frequency spot welding machine not need water cooling?
Release time:2022.04.09
Summary of information:
Small intermediate frequency spot welding machine is also called precision intermediate frequency spot welding machine. It is small in size and can be placed separately. It occupies a small area and is easy to transport. Because it often welds various small hardware parts, such as small instrument parts, small switch and socket parts, small terminal plug-in connectors, heated conductive spring metal sheets, silver contacts, silver-plated nickel-plated small parts, metal filaments, and
Small medium frequency spot welding machine is also called precisionMedium frequency spot welding machine, it is small in size and can be placed separately. It occupies a small area and is easy to transport. Because various small hardware parts are often welded, such as small instrument parts, small switch and socket parts, small terminal plug connectors, heating conductive spring metal sheets, silver contacts, silver-plated nickel-plated small parts, metal filaments and dissimilar metals, etc. These small parts are characterized by small and thin, fast electrical and thermal conductivity, and fast heat dissipation. Of course, the decisive factor is the characteristics of the small medium frequency spot welding machine itself.
Its advantages are:
1. The large current passes through the small electrode tip and instantly penetrates the workpiece for welding. The thermal impact is small and the workpiece does not deform or discolor after welding.
2. Energy saving, 30% energy saving than ordinary welding machine
3. Fast speed, millisecond speed. Compared with other spot welding machines, the welding time is shortened by 10 times when welding the same workpiece, and it is non-inductive welding.
4. High precision: 20-80 times that of ordinary spot welding machines
5. Suppress splash, precise current rising slope and time control, suppress spark splash by 90%
6. It has a wide welding range and can be tempered and welded on the basis of other welding machines.
7. Small impact on the power grid, three-phase power supply, power factor as high as 95-98%, no power compensation equipment required
8. The degree of automation is high. PLC and robots are connected to the production line, which is convenient and easy.
9. Precision and intelligence, the whole machine is small and exquisite, specially designed and manufactured for welding 3-layer boards, small thin parts and precision parts
10. DC output: Reduces welding induction energy loss. The continuous heat supply generated by the flat output current causes the nugget temperature to continuously rise. The same effect requires only lower welding current and pressure.
Wuxi Xinxing Welding Equipment Factory has been focusing on resistance welding machines for 29 years and has core technology. Its products include: copper rod and aluminum rod butt welding machines, steel bar butt welding machines, wire rope butt welding machines, copper and aluminum pipe butt welding machines, copper and aluminum row butt welding machines, flange butt welding machines,Multi-stranded copper wire and aluminum wire butt welding machine, wheel shell flash butt welding machine, auto parts spot welding machine, sheet metal spot welding machine, home appliance hardware spot welding machine, electronic appliance spot welding machine, nut spot welding machine, stainless steel spot welding machine, foil belt spot welding machine, aluminum spot welding machine, multi-head spot welding machine, bag cage spot welding machine, mesh row welding machine, ton barrel frame welding production line, resistance automatic welding machine, brazing machine, diffusion welding machine, energy storage There are more than 300 types of spot welding machines, projection welding machines, medium frequency row welding machines, automatic row welding mesh welding machines, AC seam welding machines, medium frequency seam welding machines, brazing machine diffusion welding machines, spark testing machines, ribbon meter printing machines, high-speed ribbon meter printing machines, unwinding machines, high-voltage test complete sets, etc. If you are interested in our welding equipment, please contact us.
Hot product recommendations
-
300KVA copper bar soft connection diffusion welding machine
Power: 300KVA Model: DBTH-300 Overlap: Copper skin, copper strip, copper foil soft connection, stainless steel, etc., and can also weld dissimilar materials. The hydraulic high-power medium-voltage medium-frequency copper bar soft connection diffusion welding machine mainly welds the same multi-layer copper strip, copper foil and copper skin into soft and hard copper bar connectors. It can also weld stainless steel strips, titanium zirconium and tantalum strips and multi-layer dissimilar materials. Mainly used for conductive connections in new energy vehicles, electric power stations, electrical switches, smelting power supplies, welding machines and other industries.
-
150KVA copper strip soft connection diffusion welding machine
Power: 150KVA Model: DBTH-150 Overlap: soft connection of copper skin and copper strip, stainless steel, etc., and can also weld dissimilar materials. The variable frequency polymer diffusion welding machine is a welding method that brings the surfaces of workpieces into contact with each other under a certain temperature and pressure, causing a fine liquid phase to be produced on the surface of the workpiece and gradually diffusing each other to achieve bonding. It is mainly used for soft connections of new energy vehicle batteries, soft copper bar connections of power supplies, secondary output connections of large power supplies in petrochemical industry, smelting, welding machine connection copper strip joints, etc.
-
SUN pneumatic automatic flash butt welding machine
1. Originated in 1993 2. Xinxing’s 26-year history 3. Always adhere to all-copper welding machines 4. 10-year long design life 5. 20-year service life record 6. Serve 4000+ customers 7. CQC certified products
-
UN6 flash pneumatic resistance butt welding machine
The UN6 flash pneumatic resistance butt welding machine is widely used in the butt jointing of various metal round materials, flat materials, and pipes. With different special molds, it can also weld various special-shaped materials and copper and aluminum pipe joints. The UN6 flash pneumatic butt welding machine adopts pneumatic clamping and pneumatic transverse upsetting. It is also equipped with a special butt welding controller, which can accurately adjust the welding current and welding time. The welding output can be configured as required and adopts two control methods, primary voltage feedback and secondary current feedback, to ensure consistent welding current. Just step on the foot switch to complete the entire welding process. The machine has a high degree of automation and stable welding quality. Compared with the previous standard version, the welding stroke limit and upsetting air pressure conversion functions have been updated. The non-standard version is controlled by PLC programmer, and can be equipped with optional tempering device, ejector cylinder, and positioning cylinder auxiliary action. In addition to the above extended functions, the high-end version adopts modular design and linear guide rail guidance for higher precision and easier maintenance. Please read below for advantages and features
-
DBZ medium frequency resistance spot welding machine
Xinxing medium frequency inverter pneumatic resistance spot welding machine is a three-phase alternating current that is rectified into DC, and then through an inverter circuit composed of IGBT power devices, it is converted into an intermediate frequency 1000-4000HZ AC square wave output. After being stepped down by a transformer, it is rectified into DC and supplied to the electrode for welding the workpiece. Current feedback and pulse width modulation (PWM) are used to obtain stable current output. It is one of the cutting-edge resistance welding methods today. The medium-frequency resistance spot welding machine can be used for spot welding and multi-point projection welding of ordinary low carbon steel plates, stainless steel plates, galvanized sheets, aluminum plates and wires. It can also be used for spot welding and nut projection welding of high-strength steel and hot-formed steel in the automobile manufacturing industry, as well as resistance brazing and spot welding of copper wires in the high and low voltage electrical industry, brazing of silver points and copper plates, composite silver point welding, etc. Please read below for advantages and features
-
Semi-automatic CNC UN2S copper rod resistance butt welding machine butt welding machine
1. This series of products ranks top 2 in the national market share 2. Originated in 1993 3. Xinxing’s 28-year history 4. Always adhere to all-copper welding machines 5. 10-year long design life 6. 20+ years service life 7. Serve 5000+ customers 8. CQC certified products 9. 90% repeat customers
-
160KVA copper stranded wire pneumatic butt welding machine
Model: UNG-160 Power: 160kva Butt: 50~300 square meters of copper stranded wire, aluminum stranded wire, copper rod, aluminum rod 160KVA copper stranded wire butt welding machine adopts pneumatic pressurization, photoelectric positioning, touch screen programming control, water cooling, low-voltage and high-current intelligent resistance welding machine, and welds copper multi-strand wires and aluminum multi-strand wires with sleeves Wire, stranded conductor, welded firmly in 2 seconds, smooth and without flash. Please read below for advantages and features
-
UNG precision multi-stranded copper wire butt welding machine
Model: UNG-5 Power: 5Kva Suitable for: rapid welding of multi-stranded conductors, copper strands, tinned copper strands, and aluminum strands in wire and cable factories. The UNG precision multi-stranded wire butt welding machine is a single-phase AC resistance butt welding machine. This welding machine is mainly used for welding multi-strand conductors in the wire and cable industry. It is used with casings and is welded and formed in one go. The joints are strong and beautiful, with no flash or burrs, and the wire diameter does not change. It can be directly threaded through the mold, so that the production can be changed without stopping the machine.
-
CNC type UNG multi-stranded wire butt welding machine butt welding machine
Model: UNG-5 Power: 5KVA CNC UNG multi-strand wire butt welding machine belongs to the single-phase AC resistance butt welding machine category. This welding machine can butt weld 0.75-10 square meters of copper multi-stranded wires, 4-16 square meters of aluminum multi-strand wires and various metal wires, such as steel wires, copper wires, aluminum wires, titanium alloy wires, etc. It is suitable for the welding of round rods and small wires in wire drawing, cable and metal wire processing industries. 1. Xinxing’s 30-year history 2. Always adhere to all-copper welding machines 3. 10-year long design life 4. 20+ years of service life 5. Serving 11,000+ customers 6. CE certified products 7. 90% are repeat customers
-
50KVA pneumatic multi-stranded wire butt welding machine
Model: UNG-50 Power: 50KVA Butt connection: 16-120 square copper stranded wire, 25-120 square aluminum stranded wire, tinned stranded wire φ4-12 copper rod φ4-16 aluminum rod Pneumatic multi-strand wire butt welding machine is one of the resistance welding machines (butt welding machines). A pneumatic butt welding machine developed by Xinxing Welding Equipment Factory in 2005. It adopts pneumatic clamping and pneumatic transverse upsetting, and is equipped with an internal and external full water cooling system and a special butt welding controller, which can accurately adjust parameters. At the same time, it can be used with casings to weld multi-core wire harnesses and single-core copper wires without burrs.
News·Information
Contact Xinxing
- After-sales phone number:400-001-0502
- Pre-sales phone number:199-5222-1801
- Email:cnhjsb@163.com
- Address:Next to Huaming Bridge, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Wuxi Xinxing Welding Equipment FactoryAll rights reserved
Su Public Network Security No. 32020602001105Su ICP No. 11039752
Service hotline 400-001-050213395100070 new manager
Email:cnhjsb@163.com
Factory address: Huishan District, Wuxi City, Jiangsu ProvinceHuamingqiao Industrial Zone, 161 kilometers away from National Highway 312, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
Follow the public account
Official WeChat
QR code
Characteristics of American lamps
Summary of information:
Nowadays, American lamps are very popular among young people. They not only have various styles, but also have a different charm. So what are the characteristics of American lamps? Now let the editor of Jihao Lighting share it with you.
Nowadays, American lamps are very popular among young people. They not only have various styles, but also have a different charm. So what are the characteristics of American lamps? Now let the editor of Jihao Lighting share it with you.
The characteristics of American lamps are as follows:
1. Mainly single: American lamps are mostly single color (light color) regardless of frame or shade, while European or neoclassical lamps are mostly decorated with gold or other colors, engravings, gold and silver, etc.
2. Pay attention to simplicity: Compared with European lamps, American lamps are not much different in material and style. The main advantages are simple and elegant shapes, which are more attractive. American lamps, especially chandeliers, generally use iron structural frames, which are processed with lathes to meet the high requirements of simple style for detail processing. In order to highlight the characteristics of the material itself, the frame itself will also be processed into a kind of decoration.
3. Pay attention to the atmosphere: Don’t think that because of admiration for antiques, American lamps are serious and rigid. In fact, the characteristics of American lamps are different from Chinese lamps. Most American lamps are touching, warm, natural, romantic and free. Americans yearn for the free and fashionable country style, which is the true design essence of American-style homes. Therefore, the colors used in American lampshades are light-colored beige, light yellow, linen, etc.
4. Pay attention to the integration of practicality and beauty: Another important feature of American-style lamps is that their practicality and aesthetics are closely combined, which not only illuminates the warm room but also adds a free country spirit to the entire home environment.
Hot product recommendations
