Butt welding machine-spot welding machine industry trends

The UN6 water-cooled pneumatic butt welding machine is a relatively complex resistance butt welding machine. Xinxing Welding reminds you that you must operate in accordance with this safety operating procedure. 1. When starting, turn on the water source, air source, and finally the power supply. 2. After the welding machine is powered on, it should be inspected first

Whether it is a dry-type transformer for a manual butt welder, a water-cooled transformer for a pneumatic butt welder, or an epoxy cast transformer for a high-power welder, Xinxing Welding insists on using all copper to make it, unlike some units that use aluminum instead of copper.

The UN6 water-cooled pneumatic butt welding machine is Xinxing Welding’s 6th generation butt welding machine after 29 years of continuous innovation, research and development, and practical verification. It welds various medium-sized metal bars, wires, pipes, plates, tool steel, spring steel, multi-stranded copper wires, aluminum wires, steel wire ropes, etc. quickly, accurately, well, economically and efficiently.

The UN6 water-cooled pneumatic butt welding machine is a complex resistance butt welding machine. It is designed and manufactured by Xinxing Welding based on the experience of the previous 5 generations of machines. It has many uses and the operation is also complicated. There are many adjustments to the air pressure, water flow, welding parameters, etc. The specific operations are as follows: 1.

The air source treatment triple piece, namely the oil-water separator, is a type of pneumatic component, including: air filter, pressure reducing valve and oil mist. It is an essential accessory for the gas system. Since the UN6 butt welding machine of Xinxing Welding is a pneumatic butt welding machine, it naturally needs to be equipped. The main function of the air filter is to filter out the airborne

UN6 water-cooled pneumatic butt welding machine is a multi-purpose pneumatic butt welding machine independently developed by Xinxing Welding Equipment Factory. It can butt 4-20 copper and aluminum pipes, large flat ring flanges, 10-150 square meters of multi-stranded copper wires and aluminum wires, and 4-25 rods. It has many advantages 1. Positioning, quasi-electrical and thermal conductivity

There are several types of water-cooled pneumatic butt welding machines in Xinxing Welding Equipment Factory, such as UN6 butt welding machine, UN high-power butt welding machine, SUN flash butt welding machine, etc., which are all mid-to-high-end models. This shows that the role of water cooling is relatively large. Its main components for cooling the welding machine are: 1. Transformer 2. Electrical

UN6 water-cooled pneumatic butt welding machine is the sixth generation butt welding machine independently developed and manufactured by Xinxing Welding. Compared with the previous five generations of resistance butt welding machines, it welds longer, better, faster, more accurately, has more adjustability, is safer, and has wider uses. It can not only butt conventional metal rods, pipes, profiles, and plates

The UN6 water-cooled pneumatic butt welding machine is a complex and advanced resistance butt welding machine developed and manufactured by Xinxing Welding on the basis of the 5th generation butt welding machine. It can butt various medium-sized steel rods, copper rods, aluminum rods, flat irons, flanges, steel pipes, copper pipes, aluminum pipes, copper-aluminum pipes, tool steel spring steel, multi-stranded copper wire aluminum