Butt welding machine-spot welding machine industry trends

Semi-automatic copper rod butt welding machine transformers are produced by Xinxing Welding in strict compliance with the ISO9001 quality system from raw materials to finished products. Each process is self-inspected and then re-inspected by a specialized quality inspection department and a written report is made. It has obvious advantages. It is specially made for non-level adjustment and is controlled by a controller.

Xinxing Welding semi-automatic copper rod butt welding machine belongs to the power frequency AC butt welding machine and microcomputer CNC butt welding machine of resistance welding machine. The machine head, connectors and transformers are all made of copper, so it is not wrong to call it an all-copper butt welding machine. Most of them are used to butt copper rods, copper rods and copper wires and are commonly known as copper rod butt welding machines.

Wuxi Xinxing has been focusing on resistance welding machines for 29 years and produces more than 300 varieties. The semi-automatic copper rod butt welding machine is a single-phase AC resistance butt welding machine. Some people also call it CNC copper wire butt welding machine, CNC single wire butt welding machine, CNC mobile butt welding machine, etc. It has a simple structure. Let’s take a look at it.

Xinxing Welding’s UN2S semi-automatic copper rod butt welding machine, copper wire butt welding machine, small copper bar butt welding machine can also butt aluminum rods, also called aluminum rod butt welding machine. Its operation method is simple and can be understood at a glance.

Each manufacturer has different models and installation methods. What is the installation method of Xinxing Welding's UN1S iron wire butt welding machine? Let’s explain from the following 8 points: 1. First, conduct a comprehensive initial inspection of all parts of the welding machine to see if there are any bumps or scratches during transportation. If so, contact the supplier.

Speaking of which, everything should be maintained. Only if it is well maintained can the service life exceed expectations. So what is the maintenance content of the UN1S steel wire butt welding machine? Let’s take a look with the editor of Xinxing Welding. 1. Please confirm the technical parameters on the UN1S steel wire butt welding machine label.

The precautions for the UN1S steel wire butt welding machine are as follows: 1. The equipment should be placed in a ventilated, dry and corrosive gas-free place. 2. When moving, please firmly tighten the brake pads of the universal wheel, or push it forward or backward. Pay attention to the flatness of the ground to prevent equipment damage or accidents. 3.No

Whether it is a traditional butt welding machine or a medium frequency automatic butt welding machine, several factors that have a significant impact on the quality of the joint during the welding process are: 1. Welding current 2. Welding time 3. Electrode pressure and pushing force 4. Control of the extension length of the workpiece 1. Influence of welding current

Xinxing Welding has produced 3 types of packaging for the long, medium and short distance and export transportation of UN1S iron wire butt welding machine. 1) Plastic rainproof packaging for transportation within 100 kilometers, no packaging fee. 2) Steel-sided wooden box packaging, medium and long-distance packaging, simple structure, good stretchability and weight