Butt welding machine-spot welding machine industry trends

Semi-automatic copper rod butt welding machines include low-power and medium-power butt welding machines. There are three types of common butt welding machines: 1. Round rods, such as copper rods, iron rods, steel bars, aluminum rods, and titanium wires; 2. Flat wires such as flat irons and copper bars. 3. Metal pipes such as steel pipes, aluminum pipes, and copper pipes. Its debugging should be considered based on the material and size of the workpiece to be welded.

Semi-automatic copper rod butt welding machine is also called CNC butt welding machine and copper wire butt welding machine. There are three common types of butt welding. 1. Round rods, such as copper rods, iron rods, steel bars, aluminum rods and titanium wires. 2. Flat wires such as flat irons and copper bars. 3. Metal pipes such as steel pipes, aluminum pipes, and copper pipes. The positioning groove should be based on the shape and shape of the workpiece to be welded.

Semi-automatic copper rod butt welding machine is also called power frequency AC butt welding machine, CNC copper wire butt welding machine, CNC single wire butt welding machine, and mobile butt welding machine. In fact, it is a subdivision of the written full name of resistance butt welding machine. The main category belongs to the category of resistance welding machine. Resistance welding machine uses the electric current of the workpiece itself when the current flows through the workpiece.

The UN2S semi-automatic copper rod butt welding machine is a special welding machine of Xinxing Welding. It has good butt effect on copper wires, aluminum rods and steel bars. It is cost-effective and has a high market share. It is loved by 8,000 customers. Its controller, transformer, box, machine head and other main components have significant advantages. Of course, its small size

The semi-automatic copper rod butt welding machine has been fully assembled before leaving the factory. Generally, there are no accessories that need to be assembled. The installation is very simple. You only need to connect the power cord, but there are still many other precautions. Please read it carefully before installation. 1. First of all, after receiving the product, check the welding machine inside and out.

UN2S semi-automatic copper rod butt welding machine is often used for the butt jointing of copper rods and aluminum rods below φ15mm. It is carefully designed and manufactured by Xinxing Welding according to the corresponding clamping force, upsetting force, electrical and thermal conductivity, etc. It is different from 99.9% of other manufacturers and is widely used in listed companies and small and medium-sized companies.

off outlays, technology and quality are paid more and more attention to in our country, and Xinxing Welding must also follow the trend of the times, and constantly innovate and develop resistance welding machine products, and constantly update them. Semi-automatic copper rod butt welding machines are also upgraded under this background.

Xinxing Welding UN2S semi-automatic copper rod butt welding machine belongs to the category of resistance welding machines. On the basis of UN2, it uses microcomputer controller and semiconductor thyristor control. It is also called Un2s CNC butt welding machine. It can also be called copper wire butt welding machine, copper wire butt welding machine or single wire butt welding machine. Its basic principle is

Based on Xinxing Welding’s 29 years of experience with resistance welding machines, it is safer to use a pneumatic butt welding machine for copper rods with a diameter of 15mm or more, and a semi-automatic butt welding machine for copper rods with a diameter of less than 15mm is effective and economical, so the power is not high in the design and positioning here. Our factory model UN2S, CNC 9