News·Information

The semi-automatic copper rod butt welding machine has been fully assembled before leaving the factory. Generally, there are no accessories that need to be assembled. The installation is very simple. You only need to connect the power cord, but there are still many other precautions. Please read it carefully before installation. 1. First of all, after receiving the product, check the welding machine inside and out.

UN2S semi-automatic copper rod butt welding machine is often used for the butt jointing of copper rods and aluminum rods below φ15mm. It is carefully designed and manufactured by Xinxing Welding according to the corresponding clamping force, upsetting force, electrical and thermal conductivity, etc. It is different from 99.9% of other manufacturers and is widely used in listed companies and small and medium-sized companies.

off outlays, technology and quality are paid more and more attention to in our country, and Xinxing Welding must also follow the trend of the times, and constantly innovate and develop resistance welding machine products, and constantly update them. Semi-automatic copper rod butt welding machines are also upgraded under this background.

Xinxing Welding UN2S semi-automatic copper rod butt welding machine belongs to the category of resistance welding machines. On the basis of UN2, it uses microcomputer controller and semiconductor thyristor control. It is also called Un2s CNC butt welding machine. It can also be called copper wire butt welding machine, copper wire butt welding machine or single wire butt welding machine. Its basic principle is

Based on Xinxing Welding’s 29 years of experience with resistance welding machines, it is safer to use a pneumatic butt welding machine for copper rods with a diameter of 15mm or more, and a semi-automatic butt welding machine for copper rods with a diameter of less than 15mm is effective and economical, so the power is not high in the design and positioning here. Our factory model UN2S, CNC 9

Semi-automatic copper rod butt welding machine transformers are produced by Xinxing Welding in strict compliance with the ISO9001 quality system from raw materials to finished products. Each process is self-inspected and then re-inspected by a specialized quality inspection department and a written report is made. It has obvious advantages. It is specially made for non-level adjustment and is controlled by a controller.

Xinxing Welding semi-automatic copper rod butt welding machine belongs to the power frequency AC butt welding machine and microcomputer CNC butt welding machine of resistance welding machine. The machine head, connectors and transformers are all made of copper, so it is not wrong to call it an all-copper butt welding machine. Most of them are used to butt copper rods, copper rods and copper wires and are commonly known as copper rod butt welding machines.

Wuxi Xinxing has been focusing on resistance welding machines for 29 years and produces more than 300 varieties. The semi-automatic copper rod butt welding machine is a single-phase AC resistance butt welding machine. Some people also call it CNC copper wire butt welding machine, CNC single wire butt welding machine, CNC mobile butt welding machine, etc. It has a simple structure. Let’s take a look at it.

Xinxing Welding’s UN2S semi-automatic copper rod butt welding machine, copper wire butt welding machine, small copper bar butt welding machine can also butt aluminum rods, also called aluminum rod butt welding machine. Its operation method is simple and can be understood at a glance.