News Center

Semi-automatic copper rod butt welding machine. Many people call it CNC copper wire butt welding machine, copper rod butt welding machine, wire butt welding machine, CNC manual butt welding machine, and mobile butt welding machine based on some of its characteristics. Its upsetting force adjustment is very simple. You can understand it in a few points. Let’s take a look with me.

UN2S semi-automatic copper rod butt welding machine is often used for the butt jointing of copper rods and aluminum rods below φ15mm. It is carefully designed and manufactured by Xinxing Welding according to the corresponding clamping force, upsetting force, electrical and thermal conductivity, etc. It is different from 99.9% of other manufacturers and is widely used in listed companies and small and medium-sized companies.

The semi-automatic copper rod butt welding machine has been fully assembled before leaving the factory. Generally, there are no accessories that need to be assembled. The installation is very simple. You only need to connect the power cord, but there are still many other precautions. Please read it carefully before installation. 1. First of all, after receiving the product, check the welding machine inside and out.

The UN2S semi-automatic copper rod butt welding machine is a special welding machine of Xinxing Welding. It has good butt effect on copper wires, aluminum rods and steel bars. It is cost-effective and has a high market share. It is loved by 8,000 customers. Its controller, transformer, box, machine head and other main components have significant advantages. Of course, its small size

Semi-automatic copper rod butt welding machine is also called power frequency AC butt welding machine, CNC copper wire butt welding machine, CNC single wire butt welding machine, and mobile butt welding machine. In fact, it is a subdivision of the written full name of resistance butt welding machine. The main category belongs to the category of resistance welding machine. Resistance welding machine uses the electric current of the workpiece itself when the current flows through the workpiece.

Semi-automatic copper rod butt welding machine transformers are produced by Xinxing Welding in strict compliance with the ISO9001 quality system from raw materials to finished products. Each process is self-inspected and then re-inspected by a specialized quality inspection department and a written report is made. It has obvious advantages. It is specially made for non-level adjustment and is controlled by a controller.

Based on Xinxing Welding’s 29 years of experience with resistance welding machines, it is safer to use a pneumatic butt welding machine for copper rods with a diameter of 15mm or more, and a semi-automatic butt welding machine for copper rods with a diameter of less than 15mm is effective and economical, so the power is not high in the design and positioning here. Our factory model UN2S, CNC 9

Xinxing Welding UN2S semi-automatic copper rod butt welding machine belongs to the category of resistance welding machines. On the basis of UN2, it uses microcomputer controller and semiconductor thyristor control. It is also called Un2s CNC butt welding machine. It can also be called copper wire butt welding machine, copper wire butt welding machine or single wire butt welding machine. Its basic principle is

off outlays, technology and quality are paid more and more attention to in our country, and Xinxing Welding must also follow the trend of the times, and constantly innovate and develop resistance welding machine products, and constantly update them. Semi-automatic copper rod butt welding machines are also upgraded under this background.